Our LED Strip are thinner for flexible bending and to fit in most of the aluminum profile
EnDIzLED-51 — Ultra-slim, High-CRI Bendable LED Strip
Compact, flexible, and engineered for clean, consistent light — the EnDIzLED-51 is a slim COB-style LED strip built for modern accent, task, and architectural lighting. At just 8 mm wide and 2 mm thick, it fits into tight channels and discreet installations while delivering high-quality light and reliable performance.
Key benefits
- Ultra-slim profile: 8 mm (W) × 2 mm (H) for tight or recessed installations.
- High color quality: CRI 85 for accurate color rendering.
- Powerful output: 16 W per meter — bright enough for cove, under-cabinet, and display lighting.
- Flexible & bendable: contours smoothly to curves and shapes for creative installs.
- Cuttable: cut points at 25 mm (12 V) and 50 mm (24 V) allow easy custom lengths without affecting remaining strip.
- Easy mounting: factory-applied double-sided tape for quick adhesion to clean surfaces.
- Robust construction: double-layer PCB with high-temperature PI film for improved durability and low flicker.
- Certifications & compliance: RoHS/CE and ISO-aligned quality indicators visible on product spec sheet.
- Warranty: 24 months.
Available colors
- Tunable whites: 3000 K (warm), 4000 K (neutral), 6500 K (cool)
- Solid colors: Red, Blue, Green, Amber
Electrical & mechanical highlights
- Voltage options: 12 V or 24 V
- Power consumption: 16 W/m
- Typical roll length: 1,000 mm segments with 150 mm red/black lead (22 AWG)
- Recommended driver: use a constant-voltage 12 V or 24 V power supply sized at least 20% above total strip wattage.
Suggested uses
- Cove, tray, and channel lighting
- Under-cabinet and shelf illumination
- Retail displays and signage backlighting
- Decorative and accent lighting for hospitality and residential spaces
Installation tips
- Verify correct voltage (12 V vs 24 V) and polarity before connecting.
- Ensure power supply capacity covers total run length (16 W × meters).
- Clean mounting surface; press firmly on adhesive backing for secure bond.
- Observe cut points for safe trimming; seal exposed ends in damp environments if required.
Color:
Ultra-slim, High-CRI Bendable COB LED Strip
Our LED Strip are thinner for flexible bending and to fit in most of the aluminum profile
EnDIzLED-51 — Ultra-slim, High-CRI Bendable LED Strip
Compact, flexible, and engineered for clean, consistent light — the EnDIzLED-51 is a slim COB-style LED strip built for modern accent, task, and architectural lighting. At just 8 mm wide and 2 mm thick, it fits into tight channels and discreet installations while delivering high-quality light and reliable performance.
Key benefits
- Ultra-slim profile: 8 mm (W) × 2 mm (H) for tight or recessed installations.
- High color quality: CRI 85 for accurate color rendering.
- Powerful output: 16 W per meter — bright enough for cove, under-cabinet, and display lighting.
- Flexible & bendable: contours smoothly to curves and shapes for creative installs.
- Cuttable: cut points at 25 mm (12 V) and 50 mm (24 V) allow easy custom lengths without affecting remaining strip.
- Easy mounting: factory-applied double-sided tape for quick adhesion to clean surfaces.
- Robust construction: double-layer PCB with high-temperature PI film for improved durability and low flicker.
- Certifications & compliance: RoHS/CE and ISO-aligned quality indicators visible on product spec sheet.
- Warranty: 24 months.
Available colors
- Tunable whites: 3000 K (warm), 4000 K (neutral), 6500 K (cool)
- Solid colors: Red, Blue, Green, Amber
Electrical & mechanical highlights
- Voltage options: 12 V or 24 V
- Power consumption: 16 W/m
- Typical roll length: 1,000 mm segments with 150 mm red/black lead (22 AWG)
- Recommended driver: use a constant-voltage 12 V or 24 V power supply sized at least 20% above total strip wattage.
Suggested uses
- Cove, tray, and channel lighting
- Under-cabinet and shelf illumination
- Retail displays and signage backlighting
- Decorative and accent lighting for hospitality and residential spaces
Installation tips
- Verify correct voltage (12 V vs 24 V) and polarity before connecting.
- Ensure power supply capacity covers total run length (16 W × meters).
- Clean mounting surface; press firmly on adhesive backing for secure bond.
- Observe cut points for safe trimming; seal exposed ends in damp environments if required.
Image 1 of 23
Image 2 of 23
Image 3 of 23
Image 4 of 23
Image 5 of 23
Image 6 of 23
Image 7 of 23
Image 8 of 23
Image 9 of 23
Image 10 of 23
Image 11 of 23
Image 12 of 23
Image 13 of 23
Image 14 of 23
Image 15 of 23
Image 16 of 23
Image 17 of 23
Image 18 of 23
Image 19 of 23
Image 20 of 23
Image 21 of 23
Image 22 of 23
Image 23 of 23
