ENDIzLED-40A & ENDIzLED-40B , Ultra Slim Power Supply 12V
Product description
- Overview: The ENDIZLED‑40A and ENDIZLED‑40B are ultra‑slim AC→DC LED drivers designed for low‑profile lighting installations where space is limited. Both deliver steady 12V DC output with built‑in multi‑protection to keep your LED strips and fixtures safe and flicker‑free.
Key benefits
- Ultra slim aluminum housing — fits tight cavities, under cabinets, display frames and recessed profiles.
- Stable 12V DC output for smooth, flicker‑free LED performance.
- Multiple protections (overvoltage, short circuit, overcurrent, overload) increase reliability and protect connected loads.
- Wide AC input range — works with global mains (170–260VAC).
Models & technical highlights
- ENDIZLED‑40A
- Power: 24 W
- Input voltage: 170–260 VAC
- Output voltage: 12 V DC
- Output current: 2.0 A
- Frequency: 47–63 Hz
- Size: 165 × 18 × 16 mm
- ENDIZLED‑40B
- Power: 18 W
- Input voltage: 170–260 VAC
- Output voltage: 12 V DC
- Output current: 1.5 A
- Frequency: 47–63 Hz
- Size: 135 × 18 × 16 mm
Applications
- LED strip lighting (kitchen, cove, accent)
- Under‑cabinet lighting and display cases
- Signage and small LED modules
- Slim or recessed fixtures where driver space is restricted
Installation notes & best practices
- Ensure the driver’s rated wattage exceeds the total connected LED load. We recommend leaving ~20% headroom (e.g., use the 24W driver for loads up to ~19–20W).
- Connect input to mains and output to 12V LED load according to wiring labels. If you’re not sure, have a qualified electrician install it.
- Allow some ventilation around the driver; avoid burying it in fully enclosed, unventilated spaces.
Why choose these drivers
- Space‑saving design without compromising protection or performance.
- Reliable AC‑DC conversion across a wide mains range — ideal for retrofit and custom installations.
Power:
ENDIzLED-40A & ENDIzLED-40B , Ultra Slim Power Supply 12V
Product description
- Overview: The ENDIZLED‑40A and ENDIZLED‑40B are ultra‑slim AC→DC LED drivers designed for low‑profile lighting installations where space is limited. Both deliver steady 12V DC output with built‑in multi‑protection to keep your LED strips and fixtures safe and flicker‑free.
Key benefits
- Ultra slim aluminum housing — fits tight cavities, under cabinets, display frames and recessed profiles.
- Stable 12V DC output for smooth, flicker‑free LED performance.
- Multiple protections (overvoltage, short circuit, overcurrent, overload) increase reliability and protect connected loads.
- Wide AC input range — works with global mains (170–260VAC).
Models & technical highlights
- ENDIZLED‑40A
- Power: 24 W
- Input voltage: 170–260 VAC
- Output voltage: 12 V DC
- Output current: 2.0 A
- Frequency: 47–63 Hz
- Size: 165 × 18 × 16 mm
- ENDIZLED‑40B
- Power: 18 W
- Input voltage: 170–260 VAC
- Output voltage: 12 V DC
- Output current: 1.5 A
- Frequency: 47–63 Hz
- Size: 135 × 18 × 16 mm
Applications
- LED strip lighting (kitchen, cove, accent)
- Under‑cabinet lighting and display cases
- Signage and small LED modules
- Slim or recessed fixtures where driver space is restricted
Installation notes & best practices
- Ensure the driver’s rated wattage exceeds the total connected LED load. We recommend leaving ~20% headroom (e.g., use the 24W driver for loads up to ~19–20W).
- Connect input to mains and output to 12V LED load according to wiring labels. If you’re not sure, have a qualified electrician install it.
- Allow some ventilation around the driver; avoid burying it in fully enclosed, unventilated spaces.
Why choose these drivers
- Space‑saving design without compromising protection or performance.
- Reliable AC‑DC conversion across a wide mains range — ideal for retrofit and custom installations.
Image 1 of 5
Image 2 of 5
Image 3 of 5
Image 4 of 5
Image 5 of 5
