ENDIzLED-235: 36V LED strip
ENDIzLED-235A: IP67 waterproof - 5050 LED Strip 12V/24V
Short product description
- The ENDIzLED-235 family offers a sleek, high-output LED strip built for flexible lighting projects. Using Epistar SMD chips and delivering around 110 lm/W, these strips provide bright, consistent light with low heat and long life. Choose the slim ENDIzLED-235 for compact indoor installations or the ENDIzLED-235(A) version for a wider profile with IP67 protection for wetter or exposed environments.
Key features
- High-efficiency Epistar LEDs — ~110 lumens per watt for bright, energy-efficient illumination
- Durable construction — available in a standard slim option and an IP67 silicone-coated variant
- Reliable warranty — 36 months
- Flexible application — cuttable, adhesive-backed (use recommended aluminum channel for heat dissipation and best finish)
- Multiple low-voltage options shown (confirm required voltage when ordering)
Technical highlights (from product specification panels)
- ENDIzLED-235
- Dimension: 10 mm (W) x 1.5 mm (H)
- Power: 11.5 W/m
- Nominal voltage / configuration: 36 V nominal design (spec sheet shows 96 LEDs/m density)
- LED brand: Epistar (Taiwan)
- Brightness: 110 Lumen/Watt
- Warranty: 36 months
- ENDIzLED-235(A)
- Dimension: 12 mm (W) x 2 mm (H)
- Power: 14.4 W/m
- Nominal voltage / protection: 36 V nominal; IP67 sealed (silicone) construction for water resistance
- LED brand: Epistar (Taiwan)
- Brightness: 110 Lumen/Watt
- Warranty: 36 months
Recommended uses
- ENDIzLED-235: cove and accent lighting, under-cabinet, display cases, signage backlighting, retail fixtures.
- ENDIzLED-235(A): outdoor façades, canopy/soffit lighting, architectural coves where moisture or dust exposure is a concern, or any wet-location accent.
Installation notes
- Use the correct constant-voltage driver for the strip’s rated voltage; confirm voltage variant before installation.
- Observe cut intervals printed on strip. For longest life, mount onto an aluminum profile to improve heat dissipation and protect the adhesive.
- IP67 (235(A)) is silicone-sealed — suitable for wet environments but avoid prolonged direct immersion unless specified by seller.
ENDIzLED-235: 36V LED strip
ENDIzLED-235A: IP67 waterproof - 5050 LED Strip 12V/24V
Short product description
- The ENDIzLED-235 family offers a sleek, high-output LED strip built for flexible lighting projects. Using Epistar SMD chips and delivering around 110 lm/W, these strips provide bright, consistent light with low heat and long life. Choose the slim ENDIzLED-235 for compact indoor installations or the ENDIzLED-235(A) version for a wider profile with IP67 protection for wetter or exposed environments.
Key features
- High-efficiency Epistar LEDs — ~110 lumens per watt for bright, energy-efficient illumination
- Durable construction — available in a standard slim option and an IP67 silicone-coated variant
- Reliable warranty — 36 months
- Flexible application — cuttable, adhesive-backed (use recommended aluminum channel for heat dissipation and best finish)
- Multiple low-voltage options shown (confirm required voltage when ordering)
Technical highlights (from product specification panels)
- ENDIzLED-235
- Dimension: 10 mm (W) x 1.5 mm (H)
- Power: 11.5 W/m
- Nominal voltage / configuration: 36 V nominal design (spec sheet shows 96 LEDs/m density)
- LED brand: Epistar (Taiwan)
- Brightness: 110 Lumen/Watt
- Warranty: 36 months
- ENDIzLED-235(A)
- Dimension: 12 mm (W) x 2 mm (H)
- Power: 14.4 W/m
- Nominal voltage / protection: 36 V nominal; IP67 sealed (silicone) construction for water resistance
- LED brand: Epistar (Taiwan)
- Brightness: 110 Lumen/Watt
- Warranty: 36 months
Recommended uses
- ENDIzLED-235: cove and accent lighting, under-cabinet, display cases, signage backlighting, retail fixtures.
- ENDIzLED-235(A): outdoor façades, canopy/soffit lighting, architectural coves where moisture or dust exposure is a concern, or any wet-location accent.
Installation notes
- Use the correct constant-voltage driver for the strip’s rated voltage; confirm voltage variant before installation.
- Observe cut intervals printed on strip. For longest life, mount onto an aluminum profile to improve heat dissipation and protect the adhesive.
- IP67 (235(A)) is silicone-sealed — suitable for wet environments but avoid prolonged direct immersion unless specified by seller.
Image 1 of 21
Image 2 of 21
Image 3 of 21
Image 4 of 21
Image 5 of 21
Image 6 of 21
Image 7 of 21
Image 8 of 21
Image 9 of 21
Image 10 of 21
Image 11 of 21
Image 12 of 21
Image 13 of 21
Image 14 of 21
Image 15 of 21
Image 16 of 21
Image 17 of 21
Image 18 of 21
Image 19 of 21
Image 20 of 21
Image 21 of 21
