ENDIzLED-234 — RGB Pixel Dome LED Module
ENDIzLED-234 is a rugged, high-impact RGB pixel LED module designed for bold signage, channel letters and dynamic architectural lighting. Each dome-style pixel is individually addressable, fully waterproof, and available in three sizes so you can match brightness and coverage to your project.
Key features
- Individually addressable RGB pixels — compatible with WS2801/WS2811/UCS1903/LPD6803/WS2812 and DMX512 systems for full-color effects and pixel-level animation.
- Dome-shaped optic with multiple cover options (honeycomb, flat, diamond, milk-white) to change beam spread and diffusion.
- IP66/ IP68 rated waterproof housing — suitable for outdoor signage and wet environments.
- Multiple sizes: Ø30 mm, Ø40 mm, Ø50 mm to fit different spacing and brightness needs.
- Low-voltage operation: DC12V (30 mm) or DC24V (40 & 50 mm) with efficient SMD LEDs.
- Programmable by standard controllers or software — perfect for chasing, color fades and pixel mapping.
- Easy install: mounting tabs for screw holders, pre-wired interconnects and standard spacing (commonly 8 cm).
- Long warranty: up to 4 years (manufacturer spec).
Typical specifications (select by size)
- Ø30 mm: Voltage DC12V, Power ≈ 1 W, Waterproof IP68, Warranty 4 years.
- Ø40 mm: Voltage DC24V, Power ≈ 1.4 W, Waterproof IP68, Warranty 4 years.
- Ø50 mm: Voltage DC24V, Power ≈ 2 W, Waterproof IP68, Warranty 4 years.
- Color modes: single colors (white, red, green, blue) or full RGB (DMX/WS protocols).
- Standard configuration: 20 pcs per string commonly used; recommended max cascade and cabling rules apply (do not exceed recommended lengths — typical recommendation ≤ 5 m between power feeds for low voltage runs).
Applications
- Backlit channel letters and marquee signage
- Outdoor advertising and façade lighting
- Event, stage and nightclub décor
- Holiday and themed installations
- Amusement park and display lighting
Installation notes & best practices
- Match module voltage to your supply: 12V modules require 12V, 40/50mm use 24V.
- Use a compatible controller (WS/DMX/SD controller) for addressable effects. Ensure the protocol you choose is supported.
- Observe polarity and use sufficient gauge wiring for long runs. To avoid voltage drop, feed power at intervals for long chains and keep individual run length to recommended limits.
- Secure modules using the mounting tabs and avoid over-tightening to maintain waterproof integrity.
- For diffused look, use milk-white covers; for sharper beams use diamond or honeycomb covers.
What’s included (typical)
- ENDIzLED-234 pixel modules (quantity per order varies)
- Pre-attached interconnect wires
- Mounting tabs and screw holes
(Controller, power supply and connectors typically sold separately — contact us if you want a bundled kit recommendation.)
Why choose ENDIzLED-234
ENDIzLED-234 combines weatherproof durability, flexible optics and broad protocol compatibility to deliver vibrant, programmable visuals for professional signage and creative installations. It’s built for easy mounting and reliable outdoor use — ideal when you need eye-catching color and precise pixel control.
ENDIzLED-234 — RGB Pixel Dome LED Module
ENDIzLED-234 is a rugged, high-impact RGB pixel LED module designed for bold signage, channel letters and dynamic architectural lighting. Each dome-style pixel is individually addressable, fully waterproof, and available in three sizes so you can match brightness and coverage to your project.
Key features
- Individually addressable RGB pixels — compatible with WS2801/WS2811/UCS1903/LPD6803/WS2812 and DMX512 systems for full-color effects and pixel-level animation.
- Dome-shaped optic with multiple cover options (honeycomb, flat, diamond, milk-white) to change beam spread and diffusion.
- IP66/ IP68 rated waterproof housing — suitable for outdoor signage and wet environments.
- Multiple sizes: Ø30 mm, Ø40 mm, Ø50 mm to fit different spacing and brightness needs.
- Low-voltage operation: DC12V (30 mm) or DC24V (40 & 50 mm) with efficient SMD LEDs.
- Programmable by standard controllers or software — perfect for chasing, color fades and pixel mapping.
- Easy install: mounting tabs for screw holders, pre-wired interconnects and standard spacing (commonly 8 cm).
- Long warranty: up to 4 years (manufacturer spec).
Typical specifications (select by size)
- Ø30 mm: Voltage DC12V, Power ≈ 1 W, Waterproof IP68, Warranty 4 years.
- Ø40 mm: Voltage DC24V, Power ≈ 1.4 W, Waterproof IP68, Warranty 4 years.
- Ø50 mm: Voltage DC24V, Power ≈ 2 W, Waterproof IP68, Warranty 4 years.
- Color modes: single colors (white, red, green, blue) or full RGB (DMX/WS protocols).
- Standard configuration: 20 pcs per string commonly used; recommended max cascade and cabling rules apply (do not exceed recommended lengths — typical recommendation ≤ 5 m between power feeds for low voltage runs).
Applications
- Backlit channel letters and marquee signage
- Outdoor advertising and façade lighting
- Event, stage and nightclub décor
- Holiday and themed installations
- Amusement park and display lighting
Installation notes & best practices
- Match module voltage to your supply: 12V modules require 12V, 40/50mm use 24V.
- Use a compatible controller (WS/DMX/SD controller) for addressable effects. Ensure the protocol you choose is supported.
- Observe polarity and use sufficient gauge wiring for long runs. To avoid voltage drop, feed power at intervals for long chains and keep individual run length to recommended limits.
- Secure modules using the mounting tabs and avoid over-tightening to maintain waterproof integrity.
- For diffused look, use milk-white covers; for sharper beams use diamond or honeycomb covers.
What’s included (typical)
- ENDIzLED-234 pixel modules (quantity per order varies)
- Pre-attached interconnect wires
- Mounting tabs and screw holes
(Controller, power supply and connectors typically sold separately — contact us if you want a bundled kit recommendation.)
Why choose ENDIzLED-234
ENDIzLED-234 combines weatherproof durability, flexible optics and broad protocol compatibility to deliver vibrant, programmable visuals for professional signage and creative installations. It’s built for easy mounting and reliable outdoor use — ideal when you need eye-catching color and precise pixel control.
Image 1 of 33
Image 2 of 33
Image 3 of 33
Image 4 of 33
Image 5 of 33
Image 6 of 33
Image 7 of 33
Image 8 of 33
Image 9 of 33
Image 10 of 33
Image 11 of 33
Image 12 of 33
Image 13 of 33
Image 14 of 33
Image 15 of 33
Image 16 of 33
Image 17 of 33
Image 18 of 33
Image 19 of 33
Image 20 of 33
Image 21 of 33
Image 22 of 33
Image 23 of 33
Image 24 of 33
Image 25 of 33
Image 26 of 33
Image 27 of 33
Image 28 of 33
Image 29 of 33
Image 30 of 33
Image 31 of 33
Image 32 of 33
Image 33 of 33
