ENDIzLED-233 — Magnifying Lens Z LED strip
- ENDIzLED-233 is a high‑performance, flexible LED strip engineered for illuminated channel letters, tray signs, and backlit displays. Built with SMD2835 optics and lens-covered LEDs, it delivers smooth, uniform face lighting with minimal hotspots — ideal for professional signage where consistent brightness matters.
Why you’ll love it
- Bright and efficient: strong luminous output with industry‑leading efficacy (up to ~110 lm/W; typical luminous output 1300–1500 lm/m), producing bright, even illumination for letters and logos.
- Flexible installation: low-profile 12 mm PCB and bendable construction make it easy to route around corners and custom letter shapes.
- Signage-ready: long beam angle (≈160°) and lens-covered LEDs give wide, even diffusion inside channel letters.
- Cost‑effective: low power consumption and optimized LED spacing reduce the amount of strip required per letter — lowers material and labor costs.
- Professional reliability: RoHS-style PCB, Ra ≥85 color rendering for natural color, and a 2‑year warranty for peace of mind.
Key specifications
- LED type: SMD2835 with lens
- Density: 48 LEDs/m
- Input voltage: DC 24 V
- Power: 18 W/m (typical)
- Luminous efficacy: ~1300–1500 lm/m (approx. 110 lm/W)
- Color range: 2600 K – 20000 K (selectable/variants)
- Beam angle: 160°
- Brightness per LED: ~50–55 lm/LED
- PCB width: 12 mm; strip size: 5000 × 12 × 4.7 mm
- Cut length: per LED / ~20.83 cm segments
- Protection grade: IP28 (suitable for indoor signage)
- Installation: 3M adhesive / buckles / aluminum profile
- CRI: Ra ≥85
- Warranty: 2 years
Signage example (illustrative)
- Typical single letter “A” (500 mm height, 80 mm depth): uses ~1.25 m strip, power ~13.8 W, measured illumination ~3940 Lux (results will vary with letter size and face material).
Installation tips
- Use a regulated 24 V DC driver sized with a 20–30% safety margin.
- Mount on aluminum channel or profile for heat dissipation and best results.
- Plan cuts at specified intervals (per LED/20.83 cm) to avoid damage.
- Recommended for indoor/backlit channel letters (not recommended for continuous outdoor exposure unless protected).
What’s included (typical)
- ENDIzLED-233 LED strip (5 m roll) — or cut lengths as ordered.
- End‑caps / connector options available (order separately depending on installation).
ENDIzLED-233 — Magnifying Lens Z LED strip
- ENDIzLED-233 is a high‑performance, flexible LED strip engineered for illuminated channel letters, tray signs, and backlit displays. Built with SMD2835 optics and lens-covered LEDs, it delivers smooth, uniform face lighting with minimal hotspots — ideal for professional signage where consistent brightness matters.
Why you’ll love it
- Bright and efficient: strong luminous output with industry‑leading efficacy (up to ~110 lm/W; typical luminous output 1300–1500 lm/m), producing bright, even illumination for letters and logos.
- Flexible installation: low-profile 12 mm PCB and bendable construction make it easy to route around corners and custom letter shapes.
- Signage-ready: long beam angle (≈160°) and lens-covered LEDs give wide, even diffusion inside channel letters.
- Cost‑effective: low power consumption and optimized LED spacing reduce the amount of strip required per letter — lowers material and labor costs.
- Professional reliability: RoHS-style PCB, Ra ≥85 color rendering for natural color, and a 2‑year warranty for peace of mind.
Key specifications
- LED type: SMD2835 with lens
- Density: 48 LEDs/m
- Input voltage: DC 24 V
- Power: 18 W/m (typical)
- Luminous efficacy: ~1300–1500 lm/m (approx. 110 lm/W)
- Color range: 2600 K – 20000 K (selectable/variants)
- Beam angle: 160°
- Brightness per LED: ~50–55 lm/LED
- PCB width: 12 mm; strip size: 5000 × 12 × 4.7 mm
- Cut length: per LED / ~20.83 cm segments
- Protection grade: IP28 (suitable for indoor signage)
- Installation: 3M adhesive / buckles / aluminum profile
- CRI: Ra ≥85
- Warranty: 2 years
Signage example (illustrative)
- Typical single letter “A” (500 mm height, 80 mm depth): uses ~1.25 m strip, power ~13.8 W, measured illumination ~3940 Lux (results will vary with letter size and face material).
Installation tips
- Use a regulated 24 V DC driver sized with a 20–30% safety margin.
- Mount on aluminum channel or profile for heat dissipation and best results.
- Plan cuts at specified intervals (per LED/20.83 cm) to avoid damage.
- Recommended for indoor/backlit channel letters (not recommended for continuous outdoor exposure unless protected).
What’s included (typical)
- ENDIzLED-233 LED strip (5 m roll) — or cut lengths as ordered.
- End‑caps / connector options available (order separately depending on installation).
Image 1 of 35
Image 2 of 35
Image 3 of 35
Image 4 of 35
Image 5 of 35
Image 6 of 35
Image 7 of 35
Image 8 of 35
Image 9 of 35
Image 10 of 35
Image 11 of 35
Image 12 of 35
Image 13 of 35
Image 14 of 35
Image 15 of 35
Image 16 of 35
Image 17 of 35
Image 18 of 35
Image 19 of 35
Image 20 of 35
Image 21 of 35
Image 22 of 35
Image 23 of 35
Image 24 of 35
Image 25 of 35
Image 26 of 35
Image 27 of 35
Image 28 of 35
Image 29 of 35
Image 30 of 35
Image 31 of 35
Image 32 of 35
Image 33 of 35
Image 34 of 35
Image 35 of 35
