ENDIzLED-131 Dimmable LED Downlight — Dimmerable COB downlight
Product overview
- The ENDIzLED-131 is a compact, high-performance dimmable LED downlight designed for modern ceilings and retrofit projects. It combines a low-profile, efficient COB LED with an integrated heatsink and reliable driver for bright, smooth illumination and long service life. Ideal for residential, retail and commercial spaces where quality light and a tidy finish matter.
Key benefits
- Smooth dimming — Compatible with trailing-edge dimmers for flicker-free adjustment and excellent control over ambiance.
- Clean architectural finish — Slim bezel with spring clips for fast, secure installation and a neat recessed look.
- High color quality — CRI ≥82 for natural-looking colours (great for living areas, corridors and shop displays).
- Efficient, long-life performance — Designed for extended operation with lifespans shown on the product label (typical L70 figures shown on spec sheet).
- Retrofit friendly — Replaces older PL and metal-halide downlights while delivering the benefits of LED (lower heat, instant on).
Typical applications
- Living rooms, kitchens and bedrooms
- Retail and hospitality environments
- Corridors, foyers and office spaces
- Retrofit projects replacing PL or metal-halide downlights
Technical highlights (refer to product label/variant for exact model values)
- Dimmable: trailing-edge dimmer compatible (use tested dimmers for best results)
- Driver: constant-current LED driver (example spec: max output 10W; output current ~240mA; voltage range shown on label)
- Input voltage: AC 85–265V (confirm variant marking)
- CRI: ≥82
- IP/IC rating: Not IC-rated (do not cover with insulation)
- Operating temperature: specified on label (typical ambient Ta up to 45°C)
- Warranty: 3 years (subject to terms)
Dimensions & cut-outs (select correct wattage/size)
- Example sizes from the ENDIzLED-131 family:
- 6W — hole Ø 45–50 mm, body Ø 67 mm, height 45 mm
- 9W — hole Ø 65–70 mm, body Ø 85 mm, height 65 mm
- 12W — hole Ø 85–90 mm, body Ø 110 mm, height 70 mm
- 18W / 20W — hole Ø 115–120 mm, body Ø 140 mm, height 72 mm
- Common cut-out reference: Ø125 mm shown for mid/large variants; confirm the exact model before cutting.
Installation notes
- Requires a compatible trailing-edge dimmer for dimming operation.
- Not IC-rated — ensure no direct contact with thermal insulation.
- Driver/connector should be accessible for maintenance; follow local wiring regulations.
- For emergency conversion use EMKIT2 where supported.
Why choose ENDIzLED-131
- A reliable, attractive downlight solution that balances slim design with professional performance. It’s an excellent choice when you need quality dimmable light that integrates seamlessly into ceilings and delivers consistent colour rendering and energy savings.
ENDIzLED-131 Dimmable LED Downlight — Dimmerable COB downlight
Product overview
- The ENDIzLED-131 is a compact, high-performance dimmable LED downlight designed for modern ceilings and retrofit projects. It combines a low-profile, efficient COB LED with an integrated heatsink and reliable driver for bright, smooth illumination and long service life. Ideal for residential, retail and commercial spaces where quality light and a tidy finish matter.
Key benefits
- Smooth dimming — Compatible with trailing-edge dimmers for flicker-free adjustment and excellent control over ambiance.
- Clean architectural finish — Slim bezel with spring clips for fast, secure installation and a neat recessed look.
- High color quality — CRI ≥82 for natural-looking colours (great for living areas, corridors and shop displays).
- Efficient, long-life performance — Designed for extended operation with lifespans shown on the product label (typical L70 figures shown on spec sheet).
- Retrofit friendly — Replaces older PL and metal-halide downlights while delivering the benefits of LED (lower heat, instant on).
Typical applications
- Living rooms, kitchens and bedrooms
- Retail and hospitality environments
- Corridors, foyers and office spaces
- Retrofit projects replacing PL or metal-halide downlights
Technical highlights (refer to product label/variant for exact model values)
- Dimmable: trailing-edge dimmer compatible (use tested dimmers for best results)
- Driver: constant-current LED driver (example spec: max output 10W; output current ~240mA; voltage range shown on label)
- Input voltage: AC 85–265V (confirm variant marking)
- CRI: ≥82
- IP/IC rating: Not IC-rated (do not cover with insulation)
- Operating temperature: specified on label (typical ambient Ta up to 45°C)
- Warranty: 3 years (subject to terms)
Dimensions & cut-outs (select correct wattage/size)
- Example sizes from the ENDIzLED-131 family:
- 6W — hole Ø 45–50 mm, body Ø 67 mm, height 45 mm
- 9W — hole Ø 65–70 mm, body Ø 85 mm, height 65 mm
- 12W — hole Ø 85–90 mm, body Ø 110 mm, height 70 mm
- 18W / 20W — hole Ø 115–120 mm, body Ø 140 mm, height 72 mm
- Common cut-out reference: Ø125 mm shown for mid/large variants; confirm the exact model before cutting.
Installation notes
- Requires a compatible trailing-edge dimmer for dimming operation.
- Not IC-rated — ensure no direct contact with thermal insulation.
- Driver/connector should be accessible for maintenance; follow local wiring regulations.
- For emergency conversion use EMKIT2 where supported.
Why choose ENDIzLED-131
- A reliable, attractive downlight solution that balances slim design with professional performance. It’s an excellent choice when you need quality dimmable light that integrates seamlessly into ceilings and delivers consistent colour rendering and energy savings.
Image 1 of 16
Image 2 of 16
Image 3 of 16
Image 4 of 16
Image 5 of 16
Image 6 of 16
Image 7 of 16
Image 8 of 16
Image 9 of 16
Image 10 of 16
Image 11 of 16
Image 12 of 16
Image 13 of 16
Image 14 of 16
Image 15 of 16
Image 16 of 16
