ENDIzLED-127 — LED T8 / T5 Emergency Battery Pack with Built‑in Sensor
Product summary
ENDIzLED-127 is an all‑in‑one emergency battery pack designed for LED T8 and T5 linear tubes. It integrates a high‑performance microwave sensor for presence detection, an internal emergency battery and controller, and an easy-to-use test/indicator panel — making it an ideal retrofit solution for car parks, basements, corridors and commercial fixtures that require reliable emergency lighting and smart on/off or dimming control.
Key benefits
- Seamless retrofit: Designed for direct installation with T8/T5 LED tubes for quick upgrades without replacing fixtures.
- Smart sensing: Built‑in microwave sensor offers wide coverage (6–8 m typical) with 180°–360° detection and fast, stable response — not affected by ambient temperature like PIR sensors.
- Energy saving modes: Choose On/Off or 20% basic lighting (dimming) with full brightness on motion — ideal for areas with intermittent occupancy.
- Emergency-ready: Hidden ON/OFF switch to activate emergency mode; integrated test button and status indicators (Test / Full / Charge) make commissioning and maintenance simple.
- Robust auto-testing: Built‑in automatic self-test routines (including an initial automatic test after first 12 hours and periodic checks) help ensure reliable emergency performance.
Typical applications
- Parking garages and basement areas
- Stairwells, hallways and corridors
- Warehouses and service areas
- Any linear LED installation requiring emergency backup and occupancy control
Technical highlights (available variants)
- Lengths: 2 ft / 4 ft / 5 ft
- CCT options: 3000K / 4000K / 6000K
- Lumen output: ~900 / 1800 / 2200 lm (model dependent)
- Power: 9 W / 18 W / 22 W
- Input voltage: 85–265 V, 50/60 Hz
- Sensor distance: typically 6–8 m (configurable)
- Delay time: 18–25 s (customizable)
- Sensor modes: 20% dim (idle) → 100% on motion, or ON/OFF
Installation & operation notes
- A small concealed ON/OFF switch activates the emergency function. Use the Test button to force emergency mode and validate operation — the lamp enters emergency state while pressed, then returns to normal.
- Indicators: Red (Charge), Green (Full), and Test behavior provide clear status feedback. The unit performs periodic automatic tests to verify battery and emergency function; refer to supplied instructions for fault indications and recommended maintenance.
Ordering & customization
ENDIzLED-127 is available in multiple lengths, CCT and lumen options. Sensor range, delay time and default sensor mode can be customized for bulk or project orders. Contact us for pricing, lead times and to discuss configuration for your site.
If you’d like, I can prepare a short spec sheet or help choose the right length and CCT for your space — tell me the fixture size and application, and I’ll recommend the best variant.
ENDIzLED-127 — LED T8 / T5 Emergency Battery Pack with Built‑in Sensor
Product summary
ENDIzLED-127 is an all‑in‑one emergency battery pack designed for LED T8 and T5 linear tubes. It integrates a high‑performance microwave sensor for presence detection, an internal emergency battery and controller, and an easy-to-use test/indicator panel — making it an ideal retrofit solution for car parks, basements, corridors and commercial fixtures that require reliable emergency lighting and smart on/off or dimming control.
Key benefits
- Seamless retrofit: Designed for direct installation with T8/T5 LED tubes for quick upgrades without replacing fixtures.
- Smart sensing: Built‑in microwave sensor offers wide coverage (6–8 m typical) with 180°–360° detection and fast, stable response — not affected by ambient temperature like PIR sensors.
- Energy saving modes: Choose On/Off or 20% basic lighting (dimming) with full brightness on motion — ideal for areas with intermittent occupancy.
- Emergency-ready: Hidden ON/OFF switch to activate emergency mode; integrated test button and status indicators (Test / Full / Charge) make commissioning and maintenance simple.
- Robust auto-testing: Built‑in automatic self-test routines (including an initial automatic test after first 12 hours and periodic checks) help ensure reliable emergency performance.
Typical applications
- Parking garages and basement areas
- Stairwells, hallways and corridors
- Warehouses and service areas
- Any linear LED installation requiring emergency backup and occupancy control
Technical highlights (available variants)
- Lengths: 2 ft / 4 ft / 5 ft
- CCT options: 3000K / 4000K / 6000K
- Lumen output: ~900 / 1800 / 2200 lm (model dependent)
- Power: 9 W / 18 W / 22 W
- Input voltage: 85–265 V, 50/60 Hz
- Sensor distance: typically 6–8 m (configurable)
- Delay time: 18–25 s (customizable)
- Sensor modes: 20% dim (idle) → 100% on motion, or ON/OFF
Installation & operation notes
- A small concealed ON/OFF switch activates the emergency function. Use the Test button to force emergency mode and validate operation — the lamp enters emergency state while pressed, then returns to normal.
- Indicators: Red (Charge), Green (Full), and Test behavior provide clear status feedback. The unit performs periodic automatic tests to verify battery and emergency function; refer to supplied instructions for fault indications and recommended maintenance.
Ordering & customization
ENDIzLED-127 is available in multiple lengths, CCT and lumen options. Sensor range, delay time and default sensor mode can be customized for bulk or project orders. Contact us for pricing, lead times and to discuss configuration for your site.
If you’d like, I can prepare a short spec sheet or help choose the right length and CCT for your space — tell me the fixture size and application, and I’ll recommend the best variant.
Image 1 of 25
Image 2 of 25
Image 3 of 25
Image 4 of 25
Image 5 of 25
Image 6 of 25
Image 7 of 25
Image 8 of 25
Image 9 of 25
Image 10 of 25
Image 11 of 25
Image 12 of 25
Image 13 of 25
Image 14 of 25
Image 15 of 25
Image 16 of 25
Image 17 of 25
Image 18 of 25
Image 19 of 25
Image 20 of 25
Image 21 of 25
Image 22 of 25
Image 23 of 25
Image 24 of 25
Image 25 of 25
