ENDIzLED-116 — 44‑Key RGB LED Controller
- ENDIzLED-116 is a compact, easy-to-use 12V RGB controller with a 44‑key IR remote for full control of RGB LED strip lighting — color selection, brightness, speed and custom color storage in DIY presets.
Key features
- 44-key IR remote: power, pause/start, brightness control, 20 preset static colors, quick/slow speed, AUTO/FLASH modes, JUMP/Fade effects (3/7 color options).
- DIY color memory: 6 DIY keys and arrow controls let you adjust Red/Green/Blue levels and save your favorite custom colors for one‑touch recall.
- Compact control box with plug-in connectors: simple 4‑pin RGB strip connection and DC power input.
- Practical design for indoor LED strip installations — install in seconds and control lighting without wiring changes.
Technical specs (from unit label)
- Model: ENDIzLED-116
- Input voltage: DC 12V
- Maximum output current: 6A (total)
- Recommended power supply: choose a 12V adapter with sufficient current for your LED strip load (e.g., up to 72W for full 6A load).
- Connection: standard 4‑pin RGB strip connector + IR signal receiver cable
What’s in the box
- ENDIzLED-116 RGB control box
- 44‑key IR remote (battery not included)
- Cable harness for connection to 12V supply and RGB LED strip
Quick start (3 steps)
1. Power off. Connect the RGB strip to the controller ensuring arrow/connector alignment.
2. Plug a compatible 12V DC power adapter into the controller.
3. Power on and point the IR remote at the receiver; use presets or DIY keys to set color, brightness and effects.
Usage tips
- Keep the IR receiver within line of sight of the remote for reliable operation.
- Match connector arrows (or polarity marks) when hooking up the LED strip; power to the controller should match the strip’s voltage (12V).
- To save a custom color: use the arrow buttons to fine-tune R/G/B, then press the desired DIY button to store it.
- If you plan long runs or very bright installations, use a power supply sized to the LED strip length and expected current draw.
Why choose ENDIzLED-116
- Intuitive 44‑button remote layout for quick access to presets and effects
- DIY memory for personalized scenes
- Compact controller that integrates easily with standard 12V RGB LED strips — great for accent lighting, under‑cabinet lighting, entertainment setups and decorative backlighting
ENDIzLED-116(A) — Mini 3 x 4A RGB Controller (RF)
- The ENDIzLED-116(A) is a compact inline RGB LED controller designed for small installations where space is limited. It provides three independent channels rated at 4A each (three × 4A) and is controlled wirelessly with an easy-to-use RF remote. Ideal for LED accent strips, display lighting and DIY projects.
Key benefits
- Miniature form factor — installs discreetly between the LED strip and power source.
- 3 × 4A output — individual channel control for R, G and B with a combined peak output up to 12A.
- Broad input range — accepts DC 5–24V systems for flexible use with popular LED strip voltages.
- RF remote control — simple button layout for power, color selection, speed/mode changes and brightness; RF means no strict line-of-sight required.
- Quick setup — plug-and-play 4‑pin connector makes connection fast and easy.
Main features
- 3-channel RGB control, peak output: 3 × 4A (12A total).
- Input voltage range: DC 5–24V.
- Small inline controller housing with female 4‑pin connector for RGB strips.
- RF remote powered by a CR2025 battery (insert before use; remove protective film if present).
- Mode, speed, color and brightness adjustments plus demo/preset cycling for effects.
Technical specifications
- Model: ENDIzLED-116(A)
- Input voltage: DC 5–24V
- Output current: 4A per channel (R/G/B) — peak total 12A
- Connector: 4‑pin RGB strip connector (female)
- Remote: RF wireless remote (CR2025 battery)
- Typical applications: RGB LED strips for cabinets, coves, signage, display lighting and decorative accent lighting
What’s in the box
- ENDIzLED-116(A) mini RGB controller
- RF remote control (CR2025 battery required — check and remove film before use)
- Quick start instruction card
Quick install guide
1. Power off. Connect the 4‑pin RGB strip plug to the controller (ensure pins/arrows align).
2. Connect a DC 5–24V power adapter to the controller. Verify the adapter current rating meets the LED strip load.
3. Insert CR2025 into the remote (remove any battery film), power on, and use the remote to select colors and modes.
User tips & safety
- Match voltage: only use a power supply within 5–24V.
- Ensure the power supply provides enough current for the full length of your strip (e.g., at 12V, 12A = 144W maximum).
- Keep the controller dry and install indoors or in a protected enclosure.
ENDIzLED-116 — 44‑Key RGB LED Controller
- ENDIzLED-116 is a compact, easy-to-use 12V RGB controller with a 44‑key IR remote for full control of RGB LED strip lighting — color selection, brightness, speed and custom color storage in DIY presets.
Key features
- 44-key IR remote: power, pause/start, brightness control, 20 preset static colors, quick/slow speed, AUTO/FLASH modes, JUMP/Fade effects (3/7 color options).
- DIY color memory: 6 DIY keys and arrow controls let you adjust Red/Green/Blue levels and save your favorite custom colors for one‑touch recall.
- Compact control box with plug-in connectors: simple 4‑pin RGB strip connection and DC power input.
- Practical design for indoor LED strip installations — install in seconds and control lighting without wiring changes.
Technical specs (from unit label)
- Model: ENDIzLED-116
- Input voltage: DC 12V
- Maximum output current: 6A (total)
- Recommended power supply: choose a 12V adapter with sufficient current for your LED strip load (e.g., up to 72W for full 6A load).
- Connection: standard 4‑pin RGB strip connector + IR signal receiver cable
What’s in the box
- ENDIzLED-116 RGB control box
- 44‑key IR remote (battery not included)
- Cable harness for connection to 12V supply and RGB LED strip
Quick start (3 steps)
1. Power off. Connect the RGB strip to the controller ensuring arrow/connector alignment.
2. Plug a compatible 12V DC power adapter into the controller.
3. Power on and point the IR remote at the receiver; use presets or DIY keys to set color, brightness and effects.
Usage tips
- Keep the IR receiver within line of sight of the remote for reliable operation.
- Match connector arrows (or polarity marks) when hooking up the LED strip; power to the controller should match the strip’s voltage (12V).
- To save a custom color: use the arrow buttons to fine-tune R/G/B, then press the desired DIY button to store it.
- If you plan long runs or very bright installations, use a power supply sized to the LED strip length and expected current draw.
Why choose ENDIzLED-116
- Intuitive 44‑button remote layout for quick access to presets and effects
- DIY memory for personalized scenes
- Compact controller that integrates easily with standard 12V RGB LED strips — great for accent lighting, under‑cabinet lighting, entertainment setups and decorative backlighting
ENDIzLED-116(A) — Mini 3 x 4A RGB Controller (RF)
- The ENDIzLED-116(A) is a compact inline RGB LED controller designed for small installations where space is limited. It provides three independent channels rated at 4A each (three × 4A) and is controlled wirelessly with an easy-to-use RF remote. Ideal for LED accent strips, display lighting and DIY projects.
Key benefits
- Miniature form factor — installs discreetly between the LED strip and power source.
- 3 × 4A output — individual channel control for R, G and B with a combined peak output up to 12A.
- Broad input range — accepts DC 5–24V systems for flexible use with popular LED strip voltages.
- RF remote control — simple button layout for power, color selection, speed/mode changes and brightness; RF means no strict line-of-sight required.
- Quick setup — plug-and-play 4‑pin connector makes connection fast and easy.
Main features
- 3-channel RGB control, peak output: 3 × 4A (12A total).
- Input voltage range: DC 5–24V.
- Small inline controller housing with female 4‑pin connector for RGB strips.
- RF remote powered by a CR2025 battery (insert before use; remove protective film if present).
- Mode, speed, color and brightness adjustments plus demo/preset cycling for effects.
Technical specifications
- Model: ENDIzLED-116(A)
- Input voltage: DC 5–24V
- Output current: 4A per channel (R/G/B) — peak total 12A
- Connector: 4‑pin RGB strip connector (female)
- Remote: RF wireless remote (CR2025 battery)
- Typical applications: RGB LED strips for cabinets, coves, signage, display lighting and decorative accent lighting
What’s in the box
- ENDIzLED-116(A) mini RGB controller
- RF remote control (CR2025 battery required — check and remove film before use)
- Quick start instruction card
Quick install guide
1. Power off. Connect the 4‑pin RGB strip plug to the controller (ensure pins/arrows align).
2. Connect a DC 5–24V power adapter to the controller. Verify the adapter current rating meets the LED strip load.
3. Insert CR2025 into the remote (remove any battery film), power on, and use the remote to select colors and modes.
User tips & safety
- Match voltage: only use a power supply within 5–24V.
- Ensure the power supply provides enough current for the full length of your strip (e.g., at 12V, 12A = 144W maximum).
- Keep the controller dry and install indoors or in a protected enclosure.
Image 1 of 31
Image 2 of 31
Image 3 of 31
Image 4 of 31
Image 5 of 31
Image 6 of 31
Image 7 of 31
Image 8 of 31
Image 9 of 31
Image 10 of 31
Image 11 of 31
Image 12 of 31
Image 13 of 31
Image 14 of 31
Image 15 of 31
Image 16 of 31
Image 17 of 31
Image 18 of 31
Image 19 of 31
Image 20 of 31
Image 21 of 31
Image 22 of 31
Image 23 of 31
Image 24 of 31
Image 25 of 31
Image 26 of 31
Image 27 of 31
Image 28 of 31
Image 29 of 31
Image 30 of 31
Image 31 of 31
