ENDizLED-115 : RGB Dimmer “Not your standard RGB Controller”
If you see outside those very complicated type , or the colours doesn’t seem to be made by LED strip , most likely is using this controller. This Controller is the Only RGB controller that you can fine tune to any colour you want in the world. most of the controller they are using stage RGB , you cannot fine tune , even if you can fine tune , you cannot “lock” your colour. This Controller the connector is link to the internal PCB board , If you want to fix colour all throughout you can use multi-meter to set the colour you want , it have no limit , every detail voltage 0.1V will change the colour abit. don’t be surprise that those world largest complicated LED project are using this type.
Product overview
- A compact, easy-to-use 3-channel RGB dimmer that uses advanced PWM control for smooth, stepless brightness adjustment. Ideal for RGB LED strips, LED modules and other low-voltage RGB lighting projects where manual color blending is required.
Key features
- Input voltage: DC 12–24 V
- Output channels: 3 (R, G, B) — each channel max 3 A
- Output power: 12 V — up to 108 W total (36 W per channel); 24 V — up to 216 W total (72 W per channel)
- Control: Three rotary knobs for independent, 0–100% stepless dimming of Red, Green and Blue
- PWM dimming for flicker-free adjustment and accurate color mixing
- Compact enclosure with mounting points for easy installation
- Weight: ≈ 90 g
Dimensions
- Controller size: 130 × 40 × 45 mm (L × W × H)
- Knob height: 13 mm (above panel)
Connections (quick wiring guide)
- Power input: connect DC supply to the input terminals (observe polarity: + and -).
- Output: connect RGB LED strip/module to the output terminals labeled B, G, R and V+ (common +).
- Ensure the power supply voltage matches the LED load (12 V or 24 V) and do not exceed the per-channel current limit (3 A).
Recommended applications
- Home accent lighting (coves, under-cabinet, shelving)
- Retail and display lighting
- Signage backlighting
- Small stage or event lighting where manual color control is preferred
Safety & installation tips
- For indoor, dry-location use only — not rated for outdoor/wet locations unless otherwise specified.
- Always match the controller voltage to your LED strips (12 V or 24 V).
- Do not exceed 3 A per channel. If your total load exceeds the controller rating, use a higher-capacity controller or split the load across multiple controllers.
- Use a regulated DC power supply sized to handle the total current draw plus a safety margin.
- Tighten terminal screws securely and allow ventilation around the unit to avoid overheating.
What’s included
- 1 × ENDIzLED-115 RGB knob dimmer controller
- Basic wiring diagram (printed/packaged or shown online — confirm with seller)
Why choose ENDIzLED-115
- Simple, tactile control with three knobs for immediate, intuitive color mixing and brightness control. Compact, reliable PWM performance makes it a great choice for DIY and professional RGB lighting setups where precise manual adjustment is needed.
ENDizLED-115 : RGB Dimmer “Not your standard RGB Controller”
If you see outside those very complicated type , or the colours doesn’t seem to be made by LED strip , most likely is using this controller. This Controller is the Only RGB controller that you can fine tune to any colour you want in the world. most of the controller they are using stage RGB , you cannot fine tune , even if you can fine tune , you cannot “lock” your colour. This Controller the connector is link to the internal PCB board , If you want to fix colour all throughout you can use multi-meter to set the colour you want , it have no limit , every detail voltage 0.1V will change the colour abit. don’t be surprise that those world largest complicated LED project are using this type.
Product overview
- A compact, easy-to-use 3-channel RGB dimmer that uses advanced PWM control for smooth, stepless brightness adjustment. Ideal for RGB LED strips, LED modules and other low-voltage RGB lighting projects where manual color blending is required.
Key features
- Input voltage: DC 12–24 V
- Output channels: 3 (R, G, B) — each channel max 3 A
- Output power: 12 V — up to 108 W total (36 W per channel); 24 V — up to 216 W total (72 W per channel)
- Control: Three rotary knobs for independent, 0–100% stepless dimming of Red, Green and Blue
- PWM dimming for flicker-free adjustment and accurate color mixing
- Compact enclosure with mounting points for easy installation
- Weight: ≈ 90 g
Dimensions
- Controller size: 130 × 40 × 45 mm (L × W × H)
- Knob height: 13 mm (above panel)
Connections (quick wiring guide)
- Power input: connect DC supply to the input terminals (observe polarity: + and -).
- Output: connect RGB LED strip/module to the output terminals labeled B, G, R and V+ (common +).
- Ensure the power supply voltage matches the LED load (12 V or 24 V) and do not exceed the per-channel current limit (3 A).
Recommended applications
- Home accent lighting (coves, under-cabinet, shelving)
- Retail and display lighting
- Signage backlighting
- Small stage or event lighting where manual color control is preferred
Safety & installation tips
- For indoor, dry-location use only — not rated for outdoor/wet locations unless otherwise specified.
- Always match the controller voltage to your LED strips (12 V or 24 V).
- Do not exceed 3 A per channel. If your total load exceeds the controller rating, use a higher-capacity controller or split the load across multiple controllers.
- Use a regulated DC power supply sized to handle the total current draw plus a safety margin.
- Tighten terminal screws securely and allow ventilation around the unit to avoid overheating.
What’s included
- 1 × ENDIzLED-115 RGB knob dimmer controller
- Basic wiring diagram (printed/packaged or shown online — confirm with seller)
Why choose ENDIzLED-115
- Simple, tactile control with three knobs for immediate, intuitive color mixing and brightness control. Compact, reliable PWM performance makes it a great choice for DIY and professional RGB lighting setups where precise manual adjustment is needed.
Image 1 of 15
Image 2 of 15
Image 3 of 15
Image 4 of 15
Image 5 of 15
Image 6 of 15
Image 7 of 15
Image 8 of 15
Image 9 of 15
Image 10 of 15
Image 11 of 15
Image 12 of 15
Image 13 of 15
Image 14 of 15
Image 15 of 15
