ENDIzLED-114 — RGB Amplifier , 12A
- Give your RGB LED setup the boost it needs with the ENDIzLED-114 RGB Amplifier. Designed to extend and strengthen color signals from your controller, this compact, mountable amplifier ensures consistent brightness and accurate colors across long LED runs or multiple strips. Encased in a sturdy aluminum housing with convenient screw mounting ears and pre-wired RGB connectors, it’s built for quick installation and reliable operation.
Key Features
- Signal Amplification: Restores and repeats RGB control signal so colors stay true over long distances or additional LED strips.
- Wide Voltage Compatibility: Works with common LED systems — DC 12V to 24V.
- Strong Output: Total output current up to 12A (approximately 4A per RGB channel when distributed evenly) — ideal for medium-length extensions and multiple strip sections.
- Plug-and-Play Wiring: Comes with ready RGB leads and screw terminals for easy connection to controllers, power supplies, and LED strips.
- Durable Construction: Aluminum housing provides good heat dissipation; mounting tabs simplify secure installation.
- Visible PCB Design: Quality internal components and MOSFET outputs for dependable performance.
Specifications
- Model: ENDIzLED-114 (RGB Amplifier)
- Input / Output Voltage: DC 12–24V
- Total Output Current: 12A (approx. 4A per channel when evenly split)
- Dimensions: 104.6 x 63.5 x 24.8 mm (4.12" x 2.5" x 0.97")
- Connectors: Screw terminal blocks + 4-pin RGB cable
- Housing: Aluminum with mounting tabs
Compatibility & Uses
- Works with most common RGB controllers and LED strip systems (12V or 24V).
- Ideal for: extending LED strip runs, driving additional strips from one controller, overcoming voltage drop and brightness loss on longer installations, and powering multi-zone lighting segments.
Installation Tips & Safety
- Match the amplifier voltage to your LED strips and power supply (12V or 24V).
- Connect the controller output to the amplifier input, then power the amplifier from a suitable power supply. Finally, connect the amplifier outputs to the additional LED strips.
- Avoid exceeding the total 12A output. For long runs, inject power at multiple points to prevent voltage drop.
- Provide ventilation and mount on a non-flammable surface. Turn power off before wiring.
What’s in the Box
- ENDIzLED-114 RGB Amplifier
- Pre-wired 4-pin RGB connector cable
- Mounting hardware and user manual
Recommended Accessories
- Compatible DC 12V/24V power supply with adequate amperage
- Additional RGB terminal connectors or extension wires for neat installations
ENDIzLED-114 — RGB Amplifier , 12A
- Give your RGB LED setup the boost it needs with the ENDIzLED-114 RGB Amplifier. Designed to extend and strengthen color signals from your controller, this compact, mountable amplifier ensures consistent brightness and accurate colors across long LED runs or multiple strips. Encased in a sturdy aluminum housing with convenient screw mounting ears and pre-wired RGB connectors, it’s built for quick installation and reliable operation.
Key Features
- Signal Amplification: Restores and repeats RGB control signal so colors stay true over long distances or additional LED strips.
- Wide Voltage Compatibility: Works with common LED systems — DC 12V to 24V.
- Strong Output: Total output current up to 12A (approximately 4A per RGB channel when distributed evenly) — ideal for medium-length extensions and multiple strip sections.
- Plug-and-Play Wiring: Comes with ready RGB leads and screw terminals for easy connection to controllers, power supplies, and LED strips.
- Durable Construction: Aluminum housing provides good heat dissipation; mounting tabs simplify secure installation.
- Visible PCB Design: Quality internal components and MOSFET outputs for dependable performance.
Specifications
- Model: ENDIzLED-114 (RGB Amplifier)
- Input / Output Voltage: DC 12–24V
- Total Output Current: 12A (approx. 4A per channel when evenly split)
- Dimensions: 104.6 x 63.5 x 24.8 mm (4.12" x 2.5" x 0.97")
- Connectors: Screw terminal blocks + 4-pin RGB cable
- Housing: Aluminum with mounting tabs
Compatibility & Uses
- Works with most common RGB controllers and LED strip systems (12V or 24V).
- Ideal for: extending LED strip runs, driving additional strips from one controller, overcoming voltage drop and brightness loss on longer installations, and powering multi-zone lighting segments.
Installation Tips & Safety
- Match the amplifier voltage to your LED strips and power supply (12V or 24V).
- Connect the controller output to the amplifier input, then power the amplifier from a suitable power supply. Finally, connect the amplifier outputs to the additional LED strips.
- Avoid exceeding the total 12A output. For long runs, inject power at multiple points to prevent voltage drop.
- Provide ventilation and mount on a non-flammable surface. Turn power off before wiring.
What’s in the Box
- ENDIzLED-114 RGB Amplifier
- Pre-wired 4-pin RGB connector cable
- Mounting hardware and user manual
Recommended Accessories
- Compatible DC 12V/24V power supply with adequate amperage
- Additional RGB terminal connectors or extension wires for neat installations
Image 1 of 14
Image 2 of 14
Image 3 of 14
Image 4 of 14
Image 5 of 14
Image 6 of 14
Image 7 of 14
Image 8 of 14
Image 9 of 14
Image 10 of 14
Image 11 of 14
Image 12 of 14
Image 13 of 14
Image 14 of 14
