Product: ENDIzLED-112 — 8×AA Battery Holder with DC Male Plug & On/Off Switch
A compact, robust 8-AA battery holder that delivers convenient portable power for LED strips and small DC devices. Built-in ON/OFF switch and a 5.5 × 2.1 mm DC male plug make it plug-and-play — no soldering required. Durable ABS construction, stainless springs and nickel-plated contacts ensure reliable performance for DIY projects and hobby electronics.
Key features
- Holds 8 AA batteries (in series) — nominal output ~12V with alkaline cells
- Integrated 5.5 × 2.1 mm DC male plug for easy connection to compatible devices
- Built-in ON/OFF switch for quick power control and battery conservation
- Durable ABS housing — shock-resistant, wear-resistant and heat-tolerant
- Stainless steel springs and nickel-plated contacts for stable conductivity
- Pre-wired red/black leads; no soldering required
- Mounting holes with screws for secure installation
Specifications
- Battery type: 8 × AA (batteries not included)
- Output connector: DC male plug 5.5 mm × 2.1 mm
- Switch: On/Off
- Housing: ABS plastic
- Contacts: Stainless steel springs, nickel-plated tabs
- Mounting: Fixing holes with supplied screws
What’s in the box
- ENDIzLED-112 8×AA battery holder (with attached DC plug and wires)
- Mounting screws
- Quick start: simply insert batteries (observe polarity), close the lid, plug into your device and flip the switch.
Ideal uses
- LED strips and small lighting projects
- Portable electronics and prototypes
- Arduino and microcontroller projects (use appropriate voltage regulation)
- Hobby models, crafts and field testing equipment
Installation & tips
- Insert batteries with correct polarity as marked. Close the lid fully.
- Use alkaline AA for ~12V output or NiMH rechargeables (1.2 V each) for ~9.6V.
- Disconnect or switch off when not in use to prevent battery drain.
- Not water-resistant — avoid exposure to moisture.
Safety & care
- Do not mix old and new batteries or different chemistries.
- Remove batteries if storing for extended periods.
Product: ENDIzLED-112 — 8×AA Battery Holder with DC Male Plug & On/Off Switch
A compact, robust 8-AA battery holder that delivers convenient portable power for LED strips and small DC devices. Built-in ON/OFF switch and a 5.5 × 2.1 mm DC male plug make it plug-and-play — no soldering required. Durable ABS construction, stainless springs and nickel-plated contacts ensure reliable performance for DIY projects and hobby electronics.
Key features
- Holds 8 AA batteries (in series) — nominal output ~12V with alkaline cells
- Integrated 5.5 × 2.1 mm DC male plug for easy connection to compatible devices
- Built-in ON/OFF switch for quick power control and battery conservation
- Durable ABS housing — shock-resistant, wear-resistant and heat-tolerant
- Stainless steel springs and nickel-plated contacts for stable conductivity
- Pre-wired red/black leads; no soldering required
- Mounting holes with screws for secure installation
Specifications
- Battery type: 8 × AA (batteries not included)
- Output connector: DC male plug 5.5 mm × 2.1 mm
- Switch: On/Off
- Housing: ABS plastic
- Contacts: Stainless steel springs, nickel-plated tabs
- Mounting: Fixing holes with supplied screws
What’s in the box
- ENDIzLED-112 8×AA battery holder (with attached DC plug and wires)
- Mounting screws
- Quick start: simply insert batteries (observe polarity), close the lid, plug into your device and flip the switch.
Ideal uses
- LED strips and small lighting projects
- Portable electronics and prototypes
- Arduino and microcontroller projects (use appropriate voltage regulation)
- Hobby models, crafts and field testing equipment
Installation & tips
- Insert batteries with correct polarity as marked. Close the lid fully.
- Use alkaline AA for ~12V output or NiMH rechargeables (1.2 V each) for ~9.6V.
- Disconnect or switch off when not in use to prevent battery drain.
- Not water-resistant — avoid exposure to moisture.
Safety & care
- Do not mix old and new batteries or different chemistries.
- Remove batteries if storing for extended periods.
Image 1 of 27
Image 2 of 27
Image 3 of 27
Image 4 of 27
Image 5 of 27
Image 6 of 27
Image 7 of 27
Image 8 of 27
Image 9 of 27
Image 10 of 27
Image 11 of 27
Image 12 of 27
Image 13 of 27
Image 14 of 27
Image 15 of 27
Image 16 of 27
Image 17 of 27
Image 18 of 27
Image 19 of 27
Image 20 of 27
Image 21 of 27
Image 22 of 27
Image 23 of 27
Image 24 of 27
Image 25 of 27
Image 26 of 27
Image 27 of 27
