ENDIzLED-504
100-Metre IP67 High-Voltage Outdoor LED Strip
ENDIzLED-504 is a professional outdoor LED strip designed for long continuous installations where ordinary 12V or 24V strips become difficult and expensive to manage. Operating directly from 220V–240V AC, it can run for up to 100 metres from a single power connection, greatly reducing the number of drivers, power injection points and electrical joints required along the installation.
Its IP67 protected construction makes it suitable for exposed outdoor areas such as condominium façades, landscape features, covered walkways, perimeter walls and long architectural outlines. The strip is enclosed within a protective PVC body that helps shield the internal circuit from rain, dust and outdoor conditions when properly connected and sealed.
With 120 LEDs per metre, ENDIzLED-504 provides a more continuous and evenly distributed line of light than lower-density high-voltage strips. This makes it especially useful for long building features where visible dark gaps or uneven brightness would affect the finished appearance.
For condominium maintenance teams and contractors, its greatest advantage is simplicity. A very long lighting route can be completed with fewer power supplies and fewer intermediate connections, making installation cleaner and future troubleshooting easier.
Strong Points
Up to 100 Metres from One Power Connection
Designed for long continuous runs of up to 100 metres using a single suitable power connection, reducing the need for repeated drivers and power injection.
Ideal for Condominium Outdoor Lighting
Well suited for estate façades, perimeter walls, covered walkways, garden features and long common-area lighting routes.
IP67 Outdoor Protection
The protective PVC enclosure helps resist rain, dust and moisture for dependable outdoor operation when all joints and end points are properly sealed.
Direct 220V–240V Operation
Connects to mains voltage through the correct dedicated connector, eliminating the need for a separate low-voltage LED driver.
Cleaner Long-Run Installation
Fewer power supplies, fewer cable routes and fewer connection points create a neater installation with less equipment to conceal.
120 LEDs Per Metre
High LED density produces a brighter and more continuous lighting effect compared with lower-density high-voltage strips.
Reduced Voltage-Drop Problems
High-voltage operation allows substantially longer runs than conventional 12V and 24V strips, which normally require repeated power injection.
Suitable for Architectural Outlining
Ideal for highlighting building edges, long ceilings, corridors, boundary walls and landscape structures.
Cuttable Every 100mm
Can be cut at the clearly marked cutting points in 10cm sections, allowing the length to be adjusted accurately for site requirements.
Slim 8mm Width
The narrow profile allows installation in compact channels, recesses and architectural details where larger strip products may not fit.
Multiple White Colour Options
Available in Warm White, Neutral White and Cool White to match different building finishes and lighting requirements.
Simplified Maintenance Planning
Using one continuous strip system with fewer external drivers makes future inspection and fault tracing more straightforward.
Recommended Applications
Condominium façade lighting
Long covered walkways
Perimeter and boundary walls
Landscape structures
Building outlines
Roof and canopy edges
Commercial exterior lighting
Hotel and resort grounds
Long corridor features
Outdoor decorative lighting
ENDIzLED-504 is most valuable when the installation route is long and conventional low-voltage strips would require too many drivers and power injection points. Its ability to operate for up to 100 metres from one connection provides a cleaner and more economical solution for large outdoor projects.
As this is a 220V–240V high-voltage product, installation must be carried out by qualified personnel using the correct connector, insulation, sealing and electrical protection. The strip must only be cut at its marked cutting points, and power must be isolated before installation or maintenance.
ENDIzLED-504 — a practical IP67 solution for long outdoor LED strip runs, capable of reaching up to 100 metres from a single power connection.
ENDIzLED-504
100-Metre IP67 High-Voltage Outdoor LED Strip
ENDIzLED-504 is a professional outdoor LED strip designed for long continuous installations where ordinary 12V or 24V strips become difficult and expensive to manage. Operating directly from 220V–240V AC, it can run for up to 100 metres from a single power connection, greatly reducing the number of drivers, power injection points and electrical joints required along the installation.
Its IP67 protected construction makes it suitable for exposed outdoor areas such as condominium façades, landscape features, covered walkways, perimeter walls and long architectural outlines. The strip is enclosed within a protective PVC body that helps shield the internal circuit from rain, dust and outdoor conditions when properly connected and sealed.
With 120 LEDs per metre, ENDIzLED-504 provides a more continuous and evenly distributed line of light than lower-density high-voltage strips. This makes it especially useful for long building features where visible dark gaps or uneven brightness would affect the finished appearance.
For condominium maintenance teams and contractors, its greatest advantage is simplicity. A very long lighting route can be completed with fewer power supplies and fewer intermediate connections, making installation cleaner and future troubleshooting easier.
Strong Points
Up to 100 Metres from One Power Connection
Designed for long continuous runs of up to 100 metres using a single suitable power connection, reducing the need for repeated drivers and power injection.
Ideal for Condominium Outdoor Lighting
Well suited for estate façades, perimeter walls, covered walkways, garden features and long common-area lighting routes.
IP67 Outdoor Protection
The protective PVC enclosure helps resist rain, dust and moisture for dependable outdoor operation when all joints and end points are properly sealed.
Direct 220V–240V Operation
Connects to mains voltage through the correct dedicated connector, eliminating the need for a separate low-voltage LED driver.
Cleaner Long-Run Installation
Fewer power supplies, fewer cable routes and fewer connection points create a neater installation with less equipment to conceal.
120 LEDs Per Metre
High LED density produces a brighter and more continuous lighting effect compared with lower-density high-voltage strips.
Reduced Voltage-Drop Problems
High-voltage operation allows substantially longer runs than conventional 12V and 24V strips, which normally require repeated power injection.
Suitable for Architectural Outlining
Ideal for highlighting building edges, long ceilings, corridors, boundary walls and landscape structures.
Cuttable Every 100mm
Can be cut at the clearly marked cutting points in 10cm sections, allowing the length to be adjusted accurately for site requirements.
Slim 8mm Width
The narrow profile allows installation in compact channels, recesses and architectural details where larger strip products may not fit.
Multiple White Colour Options
Available in Warm White, Neutral White and Cool White to match different building finishes and lighting requirements.
Simplified Maintenance Planning
Using one continuous strip system with fewer external drivers makes future inspection and fault tracing more straightforward.
Recommended Applications
Condominium façade lighting
Long covered walkways
Perimeter and boundary walls
Landscape structures
Building outlines
Roof and canopy edges
Commercial exterior lighting
Hotel and resort grounds
Long corridor features
Outdoor decorative lighting
ENDIzLED-504 is most valuable when the installation route is long and conventional low-voltage strips would require too many drivers and power injection points. Its ability to operate for up to 100 metres from one connection provides a cleaner and more economical solution for large outdoor projects.
As this is a 220V–240V high-voltage product, installation must be carried out by qualified personnel using the correct connector, insulation, sealing and electrical protection. The strip must only be cut at its marked cutting points, and power must be isolated before installation or maintenance.
ENDIzLED-504 — a practical IP67 solution for long outdoor LED strip runs, capable of reaching up to 100 metres from a single power connection.
Image 1 of 17
Image 2 of 17
Image 3 of 17
Image 4 of 17
Image 5 of 17
Image 6 of 17
Image 7 of 17
Image 8 of 17
Image 9 of 17
Image 10 of 17
Image 11 of 17
Image 12 of 17
Image 13 of 17
Image 14 of 17
Image 15 of 17
Image 16 of 17
Image 17 of 17
