ENDIzLED-503
Slim IP67 Addressable High-Voltage RGB LED Strip
ENDIzLED-503 is a slim, high-voltage RGB LED strip designed for long outdoor colour-changing installations where space is limited and conventional low-voltage systems would require too many controllers, amplifiers and power injection points.
With a width of only 10mm, ENDIzLED-503 can fit into narrower channels, architectural grooves and compact façade details while still providing the durability required for outdoor use. Its IP67 protective construction helps shield the strip from rain, dust and moisture when all connectors and end points are properly installed and sealed.
The strip operates directly on 220V–240V AC through the correct dedicated controller and connector system. One controller can operate a continuous series of up to 100 metres, making it especially suitable for long building outlines, landscape features, commercial façades and large decorative installations.
Each lighting section can be individually programmed, allowing moving colour effects, chasing sequences and dynamic patterns to travel continuously along the strip. This gives ENDIzLED-503 a major advantage over standard RGB strips that only change the entire strip to one colour at the same time.
Strong Points
Slim 10mm Width
Its narrow profile allows the strip to fit into smaller channels and tighter architectural spaces where wider outdoor RGB strips may not be suitable.
Up to 100 Metres from One Controller
A single compatible controller can operate a continuous series of up to 100 metres, greatly reducing system complexity.
Individual Programmable Sections
The strip supports individually controlled lighting sections, enabling chasing, running and animated RGB effects rather than only static full-strip colour changes.
IP67 Outdoor Protection
The protective PVC enclosure helps resist rain, dust and moisture for dependable outdoor use when correctly sealed.
Direct 220V–240V Operation
High-voltage operation supports substantially longer runs than conventional 12V or 24V addressable LED strips.
Fewer Controllers and Amplifiers Required
Long series operation reduces the number of control devices, power supplies and intermediate signal boosters needed across the installation.
Ideal for Long Façade Lighting
Well suited for building outlines, canopy edges, perimeter structures and large decorative features where effects must travel across a long distance.
Consistent Running Effects
Designed to maintain continuous programmed sequences along the installation, creating smooth visual movement across large areas.
RGB Colour-Changing Performance
Produces a wide range of colours and dynamic effects for decorative, entertainment and architectural lighting projects.
Flexible PVC Construction
The strip can follow curves and architectural contours while remaining protected within its outdoor-rated enclosure.
Dedicated Multi-Pin Connection
The special connector provides the required power, signal and control connections for reliable operation of the programmed strip.
Reduced Long-Run Installation Complexity
Using one controller for a long continuous run creates a cleaner system with fewer electrical boxes and less equipment to conceal.
Recommended Applications
Condominium façade lighting
Building outlines
Hotel exterior features
Shopping mall decorations
Long canopy edges
Landscape structures
Entertainment venues
Commercial signage features
Event installations
Architectural RGB lighting
ENDIzLED-503 is particularly useful when a project requires both long-distance RGB effects and a slim installation profile. Its 10mm width allows it to fit into compact details, while its high-voltage system enables up to 100 metres to operate from one compatible controller.
As this is a 220V–240V high-voltage programmable product, installation must be carried out by qualified personnel using the correct controller, connectors, insulation and waterproof sealing. All power must be isolated before installation or maintenance.
ENDIzLED-503 — slim enough for narrow architectural details, powerful enough to deliver programmed RGB effects across runs of up to 100 metres.
ENDIzLED-503
Slim IP67 Addressable High-Voltage RGB LED Strip
ENDIzLED-503 is a slim, high-voltage RGB LED strip designed for long outdoor colour-changing installations where space is limited and conventional low-voltage systems would require too many controllers, amplifiers and power injection points.
With a width of only 10mm, ENDIzLED-503 can fit into narrower channels, architectural grooves and compact façade details while still providing the durability required for outdoor use. Its IP67 protective construction helps shield the strip from rain, dust and moisture when all connectors and end points are properly installed and sealed.
The strip operates directly on 220V–240V AC through the correct dedicated controller and connector system. One controller can operate a continuous series of up to 100 metres, making it especially suitable for long building outlines, landscape features, commercial façades and large decorative installations.
Each lighting section can be individually programmed, allowing moving colour effects, chasing sequences and dynamic patterns to travel continuously along the strip. This gives ENDIzLED-503 a major advantage over standard RGB strips that only change the entire strip to one colour at the same time.
Strong Points
Slim 10mm Width
Its narrow profile allows the strip to fit into smaller channels and tighter architectural spaces where wider outdoor RGB strips may not be suitable.
Up to 100 Metres from One Controller
A single compatible controller can operate a continuous series of up to 100 metres, greatly reducing system complexity.
Individual Programmable Sections
The strip supports individually controlled lighting sections, enabling chasing, running and animated RGB effects rather than only static full-strip colour changes.
IP67 Outdoor Protection
The protective PVC enclosure helps resist rain, dust and moisture for dependable outdoor use when correctly sealed.
Direct 220V–240V Operation
High-voltage operation supports substantially longer runs than conventional 12V or 24V addressable LED strips.
Fewer Controllers and Amplifiers Required
Long series operation reduces the number of control devices, power supplies and intermediate signal boosters needed across the installation.
Ideal for Long Façade Lighting
Well suited for building outlines, canopy edges, perimeter structures and large decorative features where effects must travel across a long distance.
Consistent Running Effects
Designed to maintain continuous programmed sequences along the installation, creating smooth visual movement across large areas.
RGB Colour-Changing Performance
Produces a wide range of colours and dynamic effects for decorative, entertainment and architectural lighting projects.
Flexible PVC Construction
The strip can follow curves and architectural contours while remaining protected within its outdoor-rated enclosure.
Dedicated Multi-Pin Connection
The special connector provides the required power, signal and control connections for reliable operation of the programmed strip.
Reduced Long-Run Installation Complexity
Using one controller for a long continuous run creates a cleaner system with fewer electrical boxes and less equipment to conceal.
Recommended Applications
Condominium façade lighting
Building outlines
Hotel exterior features
Shopping mall decorations
Long canopy edges
Landscape structures
Entertainment venues
Commercial signage features
Event installations
Architectural RGB lighting
ENDIzLED-503 is particularly useful when a project requires both long-distance RGB effects and a slim installation profile. Its 10mm width allows it to fit into compact details, while its high-voltage system enables up to 100 metres to operate from one compatible controller.
As this is a 220V–240V high-voltage programmable product, installation must be carried out by qualified personnel using the correct controller, connectors, insulation and waterproof sealing. All power must be isolated before installation or maintenance.
ENDIzLED-503 — slim enough for narrow architectural details, powerful enough to deliver programmed RGB effects across runs of up to 100 metres.
Image 1 of 18
Image 2 of 18
Image 3 of 18
Image 4 of 18
Image 5 of 18
Image 6 of 18
Image 7 of 18
Image 8 of 18
Image 9 of 18
Image 10 of 18
Image 11 of 18
Image 12 of 18
Image 13 of 18
Image 14 of 18
Image 15 of 18
Image 16 of 18
Image 17 of 18
Image 18 of 18
