ENDlzLED-500 ,

The ENDIzLED-500 is a high-capacity 5-channel DMX512 constant-voltage decoder designed for professional RGB, RGBW, RGB+CCT, CCT and single-colour LED lighting systems. It converts standard DMX512/1990 control signals into smooth PWM output, allowing compatible constant-voltage LED strips and lighting fixtures to be controlled through a DMX console or computer-based lighting system.

With an output capacity of up to 10A per channel, the ENDIzLED-500 is built for demanding installations where ordinary low-current decoders may not be sufficient. It is especially suitable for architectural façade lighting, commercial feature lighting, stage installations, entertainment venues and large decorative LED projects.

Supporting both 12V and 24V DC, this decoder can deliver up to 600W at 12V or 1,200W at 24V, subject to correct load distribution, cable sizing, power supply capacity and installation conditions.

Key Features

Powerful 5 × 10A Output

Five independent output channels provide up to 10A per channel, making the decoder suitable for higher-load LED strip installations.

Wide LED Compatibility

Suitable for controlling:

• Single-colour LED strips

• Tunable white CCT strips

• RGB strips

• RGBW strips

• RGB+CCT strips

DMX512 / 1990 Compatible

Works with standard DMX lighting consoles, computer-controlled DMX systems and compatible architectural lighting controllers.

12V–24V Constant-Voltage Operation

Supports commonly used low-voltage LED systems, offering flexibility for different project requirements.

High Total Output Capacity

Maximum rated output:

• 12V: up to 600W

• 24V: up to 1,200W

Actual usable load should include a suitable safety margin and must not exceed the power supply, wiring or channel limits.

Smooth, Flicker-Free Dimming

The 2,000Hz PWM frequency provides smooth dimming performance for professional lighting applications.

Digital Address Display

The built-in digital display and control buttons make it easy to:

• Set the DMX starting address

• Select the operating mode

• Adjust channel configuration

• Check the current setting

Multiple DMX Connection Options

Equipped with:

• 3-pin XLR DMX input and output

• RJ45 DMX input and output

• Screw terminals for power and LED load connections

This gives installers greater flexibility when integrating the decoder into new or existing DMX systems.

Built-In Protection

Designed with protection against:

• Overheating

• Overloading

• Short circuits

Selectable Operating Modes

The ENDIzLED-500 can be configured for different LED systems, including:

• 5-channel independent dimming

• CCT warm white and cool white

• RGB

• RGBW

• RGB+CCT

• 16-bit fine dimming modes for supported configurations

This allows one decoder model to serve many different types of professional LED projects.

Recommended Applications

• Building façade lighting

• Architectural RGB and RGBW systems

• Large LED strip installations

• Hotels, bars and entertainment venues

• Stage and event lighting

• Retail feature lighting

• Commercial decorative lighting

• RGB+CCT ambience systems

• Signage and display lighting

• Synchronized multi-zone lighting projects

Why Choose ENDIzLED-500?

The ENDIzLED-500 is designed for projects that require more than a basic DMX decoder. Its 5 × 10A high-current output, broad LED compatibility and multiple DMX interfaces make it a dependable solution for larger and more complex lighting installations.

Instead of using several smaller decoders, one ENDIzLED-500 can manage a substantial constant-voltage LED load while still providing individual control across five channels. For professional façade, architectural and entertainment lighting systems, it offers the power, flexibility and control needed for reliable long-term operation.

ENDIzLED-500 — high-capacity DMX control for serious LED installations.