ENDIzLED-303
40W Deep Recessed COB Downlight — Different Even Where Nobody Looks
The ENDIzLED-303 is made for people who appreciate something genuinely different — not only from what can be seen after installation, but also from what is hidden above the ceiling.
From the outside, it is a powerful deep recessed COB downlight. Look behind it, however, and almost every part has been designed differently: 3 mounting clips, 3-wire connection, a distinctive circular heat sink and an unusually powerful 40W output from a Ø160mm-class fitting.
It is a downlight for people who care about the internal beauty and engineering of a product, even when most people will never see it.
3 Clips Instead of the Usual 2
Most recessed downlights depend on two opposing spring clips.
ENDIzLED-303 uses three mounting clips positioned around the fitting, providing three points of support around the ceiling opening.
It is a small detail — but exactly the kind of detail that makes this fitting different.
3-Wire Driver Connection
The difference continues with its 3-wire input configuration rather than the more typical simple two-wire arrangement.
Together with the three clips, it gives the ENDIzLED-303 its unusual “3 + 3” construction philosophy — details that may disappear above the ceiling after installation, but remain part of what makes the product unique.
A Heat Sink You Normally Don't See
Turn the fitting around and the real character of ENDIzLED-303 becomes obvious.
Instead of using a basic flat or conventional finned heat sink, the rear incorporates an extensive circular radial heat-dissipation structure, with numerous fins and heat-dissipation bars surrounding the LED assembly.
The large surface area is particularly important because this compact fitting is operating at a substantial 40W power level.
40W Power in a Ø160mm Fitting
One of the most interesting characteristics of ENDIzLED-303 is its combination of size and power.
At approximately Ø160mm outer diameter, the fitting delivers 40W, making it suitable where strong commercial illumination is required without moving to an excessively large downlight.
The deep reflector works together with the COB light source to control and project the light, producing a strong 60° beam suitable for demanding commercial spaces.
Adjustable Deep-Recessed Design
The inner lighting assembly can also be angled within the outer trim, allowing the light direction to be adjusted instead of being permanently restricted to straight-down illumination.
This makes it useful for highlighting displays, merchandise, walls or other areas requiring stronger directional lighting.
Key Features
40W high-power COB LED
Ø160mm outer diameter
Deep reflector optical design
60° beam angle
Adjustable lighting direction
3-point spring clip mounting
3-wire configuration
Distinctive circular multi-fin heat sink
Large heat-dissipation surface area
Separate IP65 LED driver
85–265V AC input
24-month warranty
Recommended Applications
Ideal for retail stores, showrooms, shopping malls, commercial interiors, display areas, boutiques and other spaces requiring powerful recessed lighting.
Internal Beauty Matters Too
Once a downlight is installed, most people only see its front face.
ENDIzLED-303 is for those who believe that what is hidden inside should be interesting too.
Three clips. Three wires. A highly unusual circular heat sink. Adjustable optics. And 40W of power packed into a Ø160mm fitting.
ENDIzLED-303 — because being different only on the outside isn't enough.
ENDIzLED-303
40W Deep Recessed COB Downlight — Different Even Where Nobody Looks
The ENDIzLED-303 is made for people who appreciate something genuinely different — not only from what can be seen after installation, but also from what is hidden above the ceiling.
From the outside, it is a powerful deep recessed COB downlight. Look behind it, however, and almost every part has been designed differently: 3 mounting clips, 3-wire connection, a distinctive circular heat sink and an unusually powerful 40W output from a Ø160mm-class fitting.
It is a downlight for people who care about the internal beauty and engineering of a product, even when most people will never see it.
3 Clips Instead of the Usual 2
Most recessed downlights depend on two opposing spring clips.
ENDIzLED-303 uses three mounting clips positioned around the fitting, providing three points of support around the ceiling opening.
It is a small detail — but exactly the kind of detail that makes this fitting different.
3-Wire Driver Connection
The difference continues with its 3-wire input configuration rather than the more typical simple two-wire arrangement.
Together with the three clips, it gives the ENDIzLED-303 its unusual “3 + 3” construction philosophy — details that may disappear above the ceiling after installation, but remain part of what makes the product unique.
A Heat Sink You Normally Don't See
Turn the fitting around and the real character of ENDIzLED-303 becomes obvious.
Instead of using a basic flat or conventional finned heat sink, the rear incorporates an extensive circular radial heat-dissipation structure, with numerous fins and heat-dissipation bars surrounding the LED assembly.
The large surface area is particularly important because this compact fitting is operating at a substantial 40W power level.
40W Power in a Ø160mm Fitting
One of the most interesting characteristics of ENDIzLED-303 is its combination of size and power.
At approximately Ø160mm outer diameter, the fitting delivers 40W, making it suitable where strong commercial illumination is required without moving to an excessively large downlight.
The deep reflector works together with the COB light source to control and project the light, producing a strong 60° beam suitable for demanding commercial spaces.
Adjustable Deep-Recessed Design
The inner lighting assembly can also be angled within the outer trim, allowing the light direction to be adjusted instead of being permanently restricted to straight-down illumination.
This makes it useful for highlighting displays, merchandise, walls or other areas requiring stronger directional lighting.
Key Features
40W high-power COB LED
Ø160mm outer diameter
Deep reflector optical design
60° beam angle
Adjustable lighting direction
3-point spring clip mounting
3-wire configuration
Distinctive circular multi-fin heat sink
Large heat-dissipation surface area
Separate IP65 LED driver
85–265V AC input
24-month warranty
Recommended Applications
Ideal for retail stores, showrooms, shopping malls, commercial interiors, display areas, boutiques and other spaces requiring powerful recessed lighting.
Internal Beauty Matters Too
Once a downlight is installed, most people only see its front face.
ENDIzLED-303 is for those who believe that what is hidden inside should be interesting too.
Three clips. Three wires. A highly unusual circular heat sink. Adjustable optics. And 40W of power packed into a Ø160mm fitting.
ENDIzLED-303 — because being different only on the outside isn't enough.
Image 1 of 14
Image 2 of 14
Image 3 of 14
Image 4 of 14
Image 5 of 14
Image 6 of 14
Image 7 of 14
Image 8 of 14
Image 9 of 14
Image 10 of 14
Image 11 of 14
Image 12 of 14
Image 13 of 14
Image 14 of 14
