ENDIzLED-300

18W Wide-Angle Anti-Glare LED Downlight with Safety Mark Driver

The ENDIzLED-300 is an 18W recessed LED downlight designed for projects where the existing ceiling opening size matters just as much as the light itself.

With a 140mm cut-out and 190mm outer diameter, this particular size combination is not always easy to find. It makes ENDIzLED-300 especially useful for replacement projects where you want to reuse the existing ceiling opening without unnecessarily modifying, patching or enlarging the ceiling.

The Hard-to-Find 140mm Cut-Out / 190mm Outer Diameter

Replacement downlights can become troublesome when the old fitting uses an uncommon opening size.

ENDIzLED-300 provides:

• Cut-Out / Opening: Ø140mm

• Outer Diameter: Ø190mm

• Height: Approx. 60mm

The larger 190mm outer rim also provides generous coverage around the 140mm opening, helping to conceal the existing cut-out neatly.

Safety Mark Driver

ENDIzLED-300 comes supplied with a Safety Mark labelled LED driver, providing an important consideration for installations where electrical safety and product documentation are important.

The driver is also separate from the LED fitting, making the system more practical for installation and future servicing compared with designs where everything is permanently enclosed together.

Recessed Acrylic Face for Better Glare Control

Instead of positioning the illuminated surface right at the front edge, the ENDIzLED-300 has a slightly recessed / hollow face design.

Together with its frosted acrylic diffuser, this helps soften the direct LED brightness reaching the eye. The result is a more comfortable appearance with reduced harsh glare compared with very flat, exposed high-brightness downlights.

Wide 120° Light Distribution

The diffuser is designed for a wide approximately 120° beam angle, spreading illumination across a larger area instead of concentrating everything directly below the fitting.

This makes it suitable for general-purpose illumination in corridors, offices, common areas, residential interiors and commercial spaces where broad and even lighting is preferred.

Thicker Body for Better Heat Management

Behind the clean front appearance is a more substantial housing designed to provide better heat dissipation for the LED system.

Better thermal management is particularly important for downlights operating for long periods, helping reduce unnecessary heat stress on the LED components and supporting better long-term reliability.

Key Features

• 18W LED Downlight

• Ø140mm ceiling cut-out

• Ø190mm outer diameter

• Approx. 60mm height

• Hard-to-find cut-out / outer-diameter combination

• Supplied with Safety Mark labelled LED driver

• Recessed face for improved glare control

• Frosted acrylic diffuser

• Wide 120° light distribution

• Substantial housing for improved heat dissipation

• Thick input cable

• Input: AC 100–240V, 50/60Hz

• Spring-clip recessed installation

• 24-month warranty

Recommended Applications

Ideal for replacement downlight projects, condominiums, offices, corridors, residential properties, commercial interiors, common areas and general ceiling lighting, particularly where an existing 140mm opening needs to be retained.

ENDIzLED-300 — The Right Downlight When the Existing Hole Is the Problem

Sometimes you don't need another standard downlight—you need one that actually fits the existing ceiling.

With its uncommon 140mm cut-out + 190mm outer diameter, wide diffused illumination, recessed anti-glare design, substantial housing and Safety Mark labelled driver, the ENDIzLED-300 is built to make replacement work simpler while providing comfortable everyday illumination.