ENDIzLED-295

20W COB Reflector Retail Downlight

The ENDIzLED-295 is a commercial COB reflector downlight designed especially for retail stores and spaces where strong visual brightness is important without simply increasing the wattage of every light fitting.

Reflector-style LED downlights are commonly seen in retail environments for a reason. Instead of allowing the light to spread too freely, the large polished reflector helps collect, control and direct the available light downward, creating a brighter and more concentrated visual effect on merchandise and the floor area.

Why Use a Reflector Instead of Just Increasing the Wattage?

Of course, the easiest way to get more light is to install a higher-wattage fitting.

But retail projects do not always have that freedom.

Some stores operate under electrical load restrictions, energy-consumption targets or a fixed lighting power allowance. Increasing every fitting from 20W to 30W or 40W may therefore not be practical.

ENDIzLED-295 takes another approach.

Its COB LED combined with a deep high-reflective optical chamber is designed to make better use of the available light, giving the installation a stronger, more focused appearance while remaining at 20W.

It is particularly useful for retailers who want their space to feel brighter and more visually illuminated without unnecessarily jumping to a much higher wattage fitting.

Designed for Retail Lighting

Retail lighting has a different job from ordinary general lighting.

It needs to make products visible, create contrast and help merchandise stand out. The ENDIzLED-295's reflector design produces a more controlled beam, making it suitable for:

• Fashion and apparel stores

• Supermarkets and minimarts

• Jewellery and accessory shops

• Cosmetic and beauty stores

• Showrooms

• Shopping mall retail units

• Display and merchandise areas

• Commercial interiors

Large Multi-Fin Heat Sink

Behind the fitting is a substantial multi-fin aluminium heat sink.

The numerous fins increase the available surface area for heat dissipation, helping transfer heat away from the COB LED during extended operating hours — particularly important for retail stores where lighting may remain switched on throughout the day.

Separate Matching LED Driver

ENDIzLED-295 uses a separate matching constant-current LED driver, rather than squeezing the power electronics directly into the LED body.

The driver is also connected to the fitting through a secured plug-and-socket connector, allowing the light and driver to remain firmly connected while making servicing or replacement more convenient.

Strong Installation Clips

Heavy commercial downlights need more than small lightweight spring clips.

ENDIzLED-295 is equipped with large, heavy-duty spring clips designed to hold the fitting securely against the ceiling after installation.

Key Specifications

Model: ENDIzLED-295
Power: 20W
LED Type: COB LED
Optical Design: Deep Reflector
Beam Angle: 60°
Input Voltage: 85–265V AC
Driver Output: 54–100V DC / 280mA
Outer Diameter: Approx. Ø140mm
Cut-Out: Approx. Ø120mm
Height: Approx. 70mm
Heat Sink: Multi-Fin Aluminium Heat Sink
Application: Retail / Commercial Lighting
Warranty: 24 Months

More Than Just Adding More Watts

When electrical consumption is not a concern, using a higher-wattage light is always an option. But when a project needs to work within a restricted lighting load, good optical control becomes much more important.

ENDIzLED-295 combines a 20W COB light source, deep reflector and substantial heat-dissipation system to deliver the strong, concentrated lighting appearance commonly preferred in retail environments.