EndizLED-107 MR16 Spotlight — 4W & 6W Variants
Product description
- Compact, high-efficiency MR16 spotlight designed to replace halogen lamps with crisp LED light.
- Available in two variants: 4W (ideal for accent & cabinet lighting) and 6W (brighter option for display and general spotlighting).
- Energy-saving performance — up to ~90% less energy than equivalent halogen lamps while delivering similar visual output.
Key features
- Base: GU5.3 / MR16 bi-pin (5.3 mm pin spacing)
- Size: Ø50 mm × H45 mm — fits standard MR16 fixtures
- Beam angle: Wide 120° for broad, even illumination
- 12V operation — for low-voltage lighting systems (use with LED-compatible transformer/driver)
- Certifications: CE and RoHS markings for safety and environmental compliance
- Robust LED array and glass reflector for reliable, consistent light
Performance (quick reference)
- 4W variant: approx. 400 lm (compact, efficient accent lighting)
- 6W variant: bright halogen-equivalent output (designed to replace much higher-wattage halogens while using far less power)
Transformer & installation tips (important)
- Designed for 12V low-voltage systems — always use an LED-compatible driver/transformer.
- Electronic (halogen) transformers often have a minimum load requirement. If the total LED wattage connected is below the transformer's minimum, you may experience flicker or noise.
- Recommended practice: allow ~20% headroom for transformer sizing (to account for loss). Example: 6 × 4W = 24W total → choose a transformer/driver rated ≥ 30W.
- Avoid traditional dimmable electronic transformers or high-frequency transformers (10–50Hz) unless specifically rated for LED loads. For best results, use a conventional LED driver that specifies compatibility for MR16/12V LED lamps and 50/60Hz operation.
- If dimming is required, confirm lamp and driver both state “dimmable” before use—these EndizLED-107 bulbs are best used with LED-rated dimmers/drivers.
Ideal applications
- Track lighting, display cases, retail & gallery lighting, under-cabinet lighting, landscape low-voltage fixtures (enclosed and dry location fixtures as appropriate).
Why choose EndizLED-107?
- Compact MR16 form with modern LED efficiency
- Easy drop-in replacement for many halogen MR16 lamps (check transformer compatibility)
- Multiple diode helps to narrow down the chances from dim to total shutdown
EndizLED-107 MR16 Spotlight — 4W & 6W Variants
Product description
- Compact, high-efficiency MR16 spotlight designed to replace halogen lamps with crisp LED light.
- Available in two variants: 4W (ideal for accent & cabinet lighting) and 6W (brighter option for display and general spotlighting).
- Energy-saving performance — up to ~90% less energy than equivalent halogen lamps while delivering similar visual output.
Key features
- Base: GU5.3 / MR16 bi-pin (5.3 mm pin spacing)
- Size: Ø50 mm × H45 mm — fits standard MR16 fixtures
- Beam angle: Wide 120° for broad, even illumination
- 12V operation — for low-voltage lighting systems (use with LED-compatible transformer/driver)
- Certifications: CE and RoHS markings for safety and environmental compliance
- Robust LED array and glass reflector for reliable, consistent light
Performance (quick reference)
- 4W variant: approx. 400 lm (compact, efficient accent lighting)
- 6W variant: bright halogen-equivalent output (designed to replace much higher-wattage halogens while using far less power)
Transformer & installation tips (important)
- Designed for 12V low-voltage systems — always use an LED-compatible driver/transformer.
- Electronic (halogen) transformers often have a minimum load requirement. If the total LED wattage connected is below the transformer's minimum, you may experience flicker or noise.
- Recommended practice: allow ~20% headroom for transformer sizing (to account for loss). Example: 6 × 4W = 24W total → choose a transformer/driver rated ≥ 30W.
- Avoid traditional dimmable electronic transformers or high-frequency transformers (10–50Hz) unless specifically rated for LED loads. For best results, use a conventional LED driver that specifies compatibility for MR16/12V LED lamps and 50/60Hz operation.
- If dimming is required, confirm lamp and driver both state “dimmable” before use—these EndizLED-107 bulbs are best used with LED-rated dimmers/drivers.
Ideal applications
- Track lighting, display cases, retail & gallery lighting, under-cabinet lighting, landscape low-voltage fixtures (enclosed and dry location fixtures as appropriate).
Why choose EndizLED-107?
- Compact MR16 form with modern LED efficiency
- Easy drop-in replacement for many halogen MR16 lamps (check transformer compatibility)
- Multiple diode helps to narrow down the chances from dim to total shutdown
Image 1 of 22
Image 2 of 22
Image 3 of 22
Image 4 of 22
Image 5 of 22
Image 6 of 22
Image 7 of 22
Image 8 of 22
Image 9 of 22
Image 10 of 22
Image 11 of 22
Image 12 of 22
Image 13 of 22
Image 14 of 22
Image 15 of 22
Image 16 of 22
Image 17 of 22
Image 18 of 22
Image 19 of 22
Image 20 of 22
Image 21 of 22
Image 22 of 22
